ACF Activated carbon pleated filter cartridge

  • Applicable Industries: food & beverage, pharma etc
  • Length: 5″/10″/20″/30″/40″
  • OD(mm): 68mm,69mm
  • ID(mm): Φ32mm
  • Construction: Cartridge Filter
  • Filter membrane media: Activated carbon fiber ( Liquid filtration )
  • Support: PP
  • Cage/Core/End: PP
  • Structure: Doule Membrane Structure
  • Sealing Technology: Hot melt without glue
  • O-Ring material: Silicone, EPDM, Nitrile, Viton ,Viton encapsulated PTFE
  • O-ring design: 220, 222, 226, DOE
  • End design: fin, flat, DOE



filter membrane for medical pharma and food grade


ACF Activated Carbon Pleated Filter Cartridge

Made of high-quality activated carbon fiber. Shell, Core and end cover are made of polypropylene PP; Can be designed for high-temperature resistant type, its end lining high temperature resistant material, generally used for high-temperature occasions;

The granular activated carbon filter element adopts non-toxic and odorless efficient coconut shell activated carbon and coal activated carbon as the main body, supplemented by edible grade material adhesive, by special processing molding, it sets adsorption filtration or catalytic action in one, is the liquid, air purification industry to replace the traditional activated carbon filter new generation products.


Activated carbon pleated filter cartridge using natural fruit shell activated carbon, coconut shell activated carbon or high quality media activated carbon and other high-quality water purification dedicated activated carbon production, can effectively remove pesticides, pesticide residues, organic solvents and his chemical pollution caused by industry. It can effectively remove organic matter, residual chlorine and other radioactive substances in water, and has the effect of decolorization and odor removal.


The activated carbon particle filter cartridge is filled in the plastic shell container without any chemical additives. The upper and lower inlets of the container are equipped with multi-layer superfine fiber non-woven layer to prevent the overflow of carbon powder. The shell is made of ABS material with ultrasonic welding technology. Due to the liquid from the bottom to the upper, the liquid and the activated carbon particle layer contact for a long time and a wide area, so it can effectively play the function of chlorine, deodorization, deodorization.

Interface mode: flat pressure type, pipe type.

Application areas

  1. Turbidity removal and degree-reduction filtration of liquor;
  2. Liquid medicine, hemodialysis, gas and other filtration;
  3. Decolorization and filtration of organic solvents;
  4. Water treatment and purification, in addition to taste, decolorization, in addition to organic filtration;
  5. It can replace granular activated carbon for pre-filtration of reverse osmosis device.


Construction Filter media Activated carbon fiber
Filter media support Polypropylene PP
Outside case Polypropylene PP
Core Polypropylene PP
Dimension Outside diameter Φ68mm orΦ69mm
Inside diameter Φ32mm
Length 2.5″/5″/10″/20″/30″/40″
O-ring material (gasket) Silicone, EPDM, Nitrile, Viton ,Viton encapsulated PTFE
Working condition PH Value 2- 13
Normal Temperature ≤50℃ (122℉)
MAX Temperature 80℃ (176℉) at △P≤1.0 bar (14 psi)
Max. Differential Pressure: Normal Flow direction 4.2 bar (60 psi) at 25℃ (77℉);

2.1 bar (30psi) at 25℃ (77℉).

Adsorption capacity Iodine adsorption value ≥1000mg/g