Description
Cleanroom Gel Seal Panel HEPA filter Manufacturer
the Panel HEPA filter for laboratories application can remove bacteria, fungi, and viruses. there are some reasons why laboratories need HEPA filters. Firstly, improve the success rate of experiments, the fungi and bacteria can affect some biological culture experiments. For culturing a certain type of bacteria alone, fungi. The human phylum does not want additional other microorganisms to affect the final colony formation. HEPA filter installed in a fume hood and bio-safety cabinet can generate a laminar flow from up to down or inside to outside. the purified airflow can prevent any-3rd party contamination come in.
At the same time, for some dangerous biological experiments, infectious microorganisms and bacteria cannot be allowed to be directly discharged into the outside world, these microorganisms, dust, etc. need to be collected by HEPA filter. This recycling function also protects the health of experimental staff and reduces the possibility of infection.
The reason why Laboratories Fume hood & Bio-safety Cabinet need HEPA filter
- Filter to other microorganisms for better colonies
- Collect possible sources of infection
- Improve the success rate and accuracy of experiments
- Remove 99.995 @ 0.3-micron particles and microorganisms, VOCs
- Keep stuff away from the possibility of infection

When need to replace Gel Seal Panel HEPA filter in laboratories?
It depends on the operating conditions of the experimental equipment. Usually, there are pressure detection devices on the Fume hood & Bio-safety Cabinet. When the HEPA filter reaches the final resistance, these devices will prompt that the filter needs to be replaced. You can remove these filters, and you can know the model and specification of the filter by looking at the label & nameplate. If you need to find a reliable supplier for these laboratory HEPA filters. You can contact us.
You need to know the size, efficiency, design airflow rate and resistance of the HEPA filter. When replacing the laboratory HEPA filter, you need to use a plastic bag to seal the old one to prevent the bacteria, viruses and other microorganisms it collects from escaping to the outside.
What is the advatageous of Laboratory Gel Seal Panel HEPA filter?
Laboratory Panel HEPA filter is completely different from the filter elements of common air purifiers or vacuum cleaners on the market.
First of all, its filter material is different. Its unique glass fiber filter material can effectively filter any microorganisms, dust that is larger than 0.3 microns. Fiberglass is more reliable than any filter material and is suitable for the strictest air purification.
Secondly, it has the most perfect seal, AB polyurethane two-component sealant can completely seal the filter media pack into the frame without any possibility of leakage. The gel gasket allows the filter to achieve perfect air-tight with the fume hood & Bio-safety cabinet and is completely sealed.
PARAMETERS
Item No | Size(mm) | Air flow rate | Pressure drop | Efficiency | Filter Area |
---|---|---|---|---|---|
EA-FG-557 | 550*550*75 | 750m³/h | 220Pa | H13 EN:1822 | 9m² |
EA-FG-667 | 630*630*75 | 1100m³/h | 220Pa | H13 EN:1822 | 12.5m² |
EA-FG-967 | 915*610*75 | 1500m³/h | 220Pa | H13 EN:1822 | 19m² |
EA-FG-5593 | 550*550*93 | 1000m³/h | 220Pa | H13 EN:1822 | 12m² |
EA-FG-6693 | 630*630*93 | 1500m³/h | 220Pa | H13 EN:1822 | 16.5m² |
EA-FG-9693 | 915*610*93 | 2000m³/h | 220Pa | H13 EN:1822 | 24m² |
EA-FG-5590 | 550*550*90 | 1000m³/h | 220Pa | H13 EN:1822 | 11.5m² |
EA-FG-6690 | 630*630*90 | 1500m³/h | 220Pa | H13 EN:1822 | 15.5m² |
EA-FG-9690 | 915*610*90 | 2000m³/h | 220Pa | H13 EN:1822 | 23m² |
EA-FG-5580 | 550*550*80 | 900m³/h | 220Pa | H13 EN:1822 | 10m² |
EA-FG-6680 | 630*630*80 | 1300m³/h | 220Pa | H13 EN:1822 | 14m² |
EA-FG-9680 | 915*610*80 | 1800m³/h | 220Pa | H13 EN:1822 | 21m² |